Ba-Ferrite 자성체를 사용한 자기연마 가공
기관명 | NDSL |
---|---|
저널명 | 한국공작기계학회지 = Journal of the Korean society of machine tool engineers |
ISSN | 1226-8097, |
ISBN |
저자(한글) | 윤여권,김희남 |
---|---|
저자(영문) | |
소속기관 | |
소속기관(영문) | |
출판인 | |
간행물 번호 | |
발행연도 | 2010-01-01 |
초록 | The magnetic polishing is the useful method to finish some machinery fabrications by using magnetic power. This method is one of the precision techniques and has an aim for clean technology in the clean pipes. The magnetic abrasive polishing method is not so common in the field of machine that it is not known to widely. There are rarely researcher in this field because of non-effectiveness of magnetic abrasive. This paper deals with mediocritizing magnetic polishing device into regular lathe and this experiment was conducted in order to get the best surface roughness at low cost. This paper contains the result of experiment to acquire the best surface roughness, not using the high-cost polishing material in processing. In this paper, We could have investigated into the changes of the movement of magnetic abrasive grain. In reference to this result, we could have made the experiment which is set under the condition of the magnetic flux density, polishing velocity according to the form of magnetic brush. |
원문URL | http://click.ndsl.kr/servlet/OpenAPIDetailView?keyValue=03553784&target=NART&cn=JAKO201033062366907 |
첨부파일 |
과학기술표준분류 | |
---|---|
ICT 기술분류 | |
DDC 분류 | |
주제어 (키워드) | 바륨-페라이트,자속밀도,자기연마,녹색탄화규소,입방정질화붕소,표면거칠기,Ba-Ferrite,Magnetic flux density,Magnetic polishing,GC,CBN,Surface roughness |