- HOME
- 홈페이지 이용안내
논문 기본정보
ZnO nanopowder derived from brass ash: Sintering behavior and mechanical properties
논문 개요
| 기관명 | NDSL |
|---|---|
| 저널명 | International journal of mineral processing |
| ISSN | 0301-7516, |
| ISBN |
논문저자 및 소속기관 정보
| 저자(한글) | Lee, T.H.,Nersisyan, H.H.,Kwon, S.C.,Joo, S.H.,Park, K.T.,Lee, J.H. |
|---|---|
| 저자(영문) | |
| 소속기관 | |
| 소속기관(영문) | |
| 출판인 | |
| 간행물 번호 | |
| 발행연도 | 2016-01-01 |
| 초록 | The present investigation studied the recycling of zinc from brass ash which is a secondary product produced during the brass smelting process. A retiring cycle was devised to produce high-purity ZnO nanopowders. Recovery of gt;90wt% of the total zinc available was achieved after the calcination of brass ash at 700 o C and a multistage hydrometallurgical treatment at room temperature. ZnO powder produced by the developed method was analyzed by X-ray diffraction, transmission electron scanning microscopy, ICP-AES and BET analysis. The ZnO nanopowder obtained from the brass ash was well dispersed and the size of the individual particles was in the range of 30-50nm. The purity of the powder was 99.83wt%, and the surface area was about 30.5m 2 /g. A relative density level of about 98.1% was reached with ZnO pellets sintered at 1300 o C. |
| 원문URL | http://click.ndsl.kr/servlet/OpenAPIDetailView?keyValue=03553784&target=NART&cn=NART75835760 |
| 첨부파일 |
추가정보
| 과학기술표준분류 | |
|---|---|
| ICT 기술분류 | |
| DDC 분류 | |
| 주제어 (키워드) | Zinc oxide,Nanopowder,Brass ash,Calcination,Hydrometallurgical treatment |