압력 열분석기
| 기관명 | ZEUS |
|---|---|
| 장비번호 | |
| 제작사 | Thermo Electron |
| 모델명 | TherMax 500 |
| 장비사양 | |
| 취득일자 | 2009-05-30 |
| 취득금액 |
| 보유기관명 | 우석대학교 산학협력단 |
|---|---|
| 보유기관코드 | |
| 활용범위 | |
| 활용상태 | |
| 표준코드 | F504 |
| 표준분류명 | |
| 시설장비 설명 | 연료전지의 수소 저장 장치의 재료를 압력 및 가스 반응에 의한 거동을 측정하는 방법A. Pressure Balance a. Sensitivity : 10㎍ b. Capacity - Weight : 100g - Volume : 20cc c. Dynamic Range : 10000000 : 1 d. Gold anodized weighing mechanism e. Temperature Drift : 10㎍/℃ f. Accuracy at ambient pressure <.02% g. Repeatability <.0001% f. Safety protection valve from high pressure B. Furnace Vessel a. Temperature : Amb. to 1100℃ low mass furnace with mounting assey. b. Temperature range at ambient pressure : Up to 1100℃ at 1000psi : Up to 1000℃ c. Heating rate maximum : 25℃/min d. Temperature repeatability: +3℃ e. Pressure vessel is built and inspected in accordance with section VIII Division I(1980 edition Winter 1982 Addenda) and to bear the National board stamp. Balance chamber design conditions: 700 psig at ambient to 250℃ at surface. Material : type 316. C. Sample thermocouple "K"- 고압 하에서 연료전지 재료 평가 - 고온 하에서 재료의 반응성 측정 - Stability 측정 - H2 gas 하에서 재료의 반응성 측정 - Permitibility 측정 - Kinetic 및 유동성 가스 하에서 재료 평가 |
| 장비이미지코드 | http://nfec.ntis.go.kr/storage/images/equip/photo/201101/.thumb/20110105132004.JPG |
| 장비위치주소 | 전북 완주군 봉동읍 둔산리 864-10 지역혁신센터 우석대학교 지역혁신센터 1층 106 |
| NFEC 등록번호 | NFEC-2011-01-131493 |
| 예약방법 | |
| 카타로그 URL | |
| 메뉴얼 URL | |
| 원문 URL | http://www.zeus.go.kr/equip/read?equipId=Z-NTIS-0021122 |
| 첨부파일 |
| 과학기술표준분류 | |
|---|---|
| ICT 기술분류 | |
| 주제어 (키워드) |