- HOME
- 홈페이지 이용안내
장비 및 시설 기본정보
레이저빔프로파일러
장비 개요
| 기관명 | ZEUS |
|---|---|
| 장비번호 | |
| 제작사 | Newport |
| 모델명 | LBP-2-USB |
| 장비사양 | |
| 취득일자 | 2008-09-19 |
| 취득금액 |
보유기관 및 이용정보
| 보유기관명 | (주)엠비젼 |
|---|---|
| 보유기관코드 | |
| 활용범위 | |
| 활용상태 | |
| 표준코드 | A313 |
| 표준분류명 | |
| 시설장비 설명 | The LBP-2-USB Laser Beam Profiling Camera is a powerful software driven device with complete beam diagnostic measurement features including a multi-measurement routine to increase signal integrity for higher accuracy results. For continuous or pulsed 350-1100 nm visable laser beams it provides an extensive range of graphical presentations and analysis capabilities of laser beam parameters such as: beam width shape position power and intensity profiles. The CCD camera is equipped with a built-in filter wheel enabling the use of up to four 0.5 in. diameter attenuators. Three attenuators are included with the system: LBP-NG4 LBP-NG9 and LBP-NG10 while additional ones may be purchased separately. The camera can be post-mounted via a single 8/32-threaded hole centered directly below the sensor surface. USB interface Model LBP-2-USB Detector Type Silicon CCD Spectral Range 350-1100 nm Sensor Size 0.255 x 0.190 in. (6.47 x 4.83 mm) Minimum Power Density 0.5 nW/cm2 at 633 nm Damage Threshold 50 W/cm2 (1 J/cm2) for all filters installed (NG4 NG9 and NG10) Computer Interface USB Operating Mode Interline camera mode for CW operation and frame transfer mode for pulsed operation. Gain 6-60 dB with software control Sync Output Female RCA Connector Trigger Input In pulsed mode threshold level adjustable Shutter 1/50 - 1/100000 sec Maximum Frequency 10 Hz for single pulse capture Hz Dynamic Range >1011:1 using software controlled gain control electronic shutter and external filters (3xNG10 filters) Dimensions ø2.9 x 1.71 x 2.2 in. in. (ø73 x 43.5 x 56 mm mm)Model LBP-2-USB Detector Type Silicon CCD Spectral Range 350-1100 nm Sensor Size 0.255 x 0.190 in. (6.47 x 4.83 mm) Minimum Power Density 0.5 nW/cm2 at 633 nm Damage Threshold 50 W/cm2 (1 J/cm2) for all filters installed (NG4 NG9 and NG10) Minimum Spot Size 150 μm Computer Interface USB Operating Mode Interline camera mode for CW operation and frame transfer mode for pulsed operation. Gain 6-60 dB with software control Sync Output Female RCA Connector Trigger Input In pulsed mode threshold level adjustable Shutter 1/50 - 1/100000 sec Maximum Frequency 10 Hz for single pulse capture Hz Dynamic Range >1011:1 using software controlled gain control electronic shutter and external filters (3xNG10 filters) Dimensions ø2.9 x 1.71 x 2.2 in. (ø73 x 43.5 x 56 mm mm)A laser beam profiler captures displays and records the spatial intensity profile of a laser beam at a particular plane transverse to the beam propagation path. Since there are many types of lasers ？ ultraviolet visible infrared continuous wave pulsed high-power low-power ？ there is an assortment of instrumentation for measuring laser beam profiles. No single laser beam profiler can handle every power level pulse duration repetition rate wavelength and beam size. |
| 장비이미지코드 | http://nfec.ntis.go.kr/storage/images/equip/photo/201102/.thumb/20110225112302.jpg |
| 장비위치주소 | 충북 청주시 흥덕구 복대1동 418-6 (주)엠비젼 F1 F1 |
| NFEC 등록번호 | NFEC-2009-10-073631 |
| 예약방법 | |
| 카타로그 URL | |
| 메뉴얼 URL | |
| 원문 URL | http://www.zeus.go.kr/equip/read?equipId=Z-NTIS-0014142 |
| 첨부파일 |
추가정보
| 과학기술표준분류 | |
|---|---|
| ICT 기술분류 | |
| 주제어 (키워드) |