네트웍 분석기
기관명 | ZEUS |
---|---|
장비번호 | |
제작사 | Agilent Technologies |
모델명 | E5061B |
장비사양 | |
취득일자 | 2012-12-04 |
취득금액 |
보유기관명 | 한국표준과학연구원 |
---|---|
보유기관코드 | |
활용범위 | |
활용상태 | |
표준코드 | D200 |
표준분류명 | |
시설장비 설명 | E5061B-3L5 To ensure the performance and reliability of electronic equipment it is crucial to evaluate impedance characteristics of various electronic components used in the circuits. The E5061B-005 is the impedance analysis fi rmware option for the E5061B- 3L5 ENA Series LF-RF network analyzer. The E5061B-005 combines network analysis (NA) and impedance analysis (ZA) functions in a single instrument with comprehensive component and circuit characterization in a broad frequency range 5 Hz to 3 GHz. E5061BEP-NZA ENA network analyzer express confi guration is equivalent to the E5061B with options 3L5/020/ 005/720/1E5. For more information about the Express ENA visit (www.agilent.com/fi nd/ express-e5061b)Impedance analysis functions Impedance parameters IZI θz IYI θy Cp Cs Lp Ls Rp Rs D Q R X G B Measurement methods Port 1 Refl ection Port 2 Refl ection Port 1-2 Series-thru Port 1-2 Shunt-thru Gain-phase Series-thru Gain-phase Shunt-thru Equivalent circuit analysis 3-component model (4 models: A/B/C/D) 4-component model (1 model: E) Source characteristics Test frequency 5 Hz to 3 GHz (Port-1 and 2) 5 Hz to 30 MHz (Gain-Phase test port) 1 mHz resolution AC source power (Osc level) ?45 to + 10 dBm (when the source port is terminated with 50 Ω DC voltage bias 0 to +-40 V (100 mA max.) 1 mV resolution (0 V to ±10 V) 4 mV resolution (10 V to 40 V -10 V to -40 V) DC bias monitor available (voltage or current) Output impedance 50 Ω (nominal) Sweep characteristics Sweep types Linear frequency sweep Logarithmic frequency sweep Segment sweep Power sweep (in dBm unit) DC bias sweep Sweep direction Up sweep Number of point 2 to 1601 Error correction (for impedance measurements) Calibration Impedance calibration (open/short/load and optional low-loss capacitor). Response thru calibration Full 1-port calibration Full 2-port calibration ECal 1 Port extensions. Fixture compensation Fixture selection (port extension for 7 mm fixtures) open/short/load compensation.소자나 회로의 전달함수 및 임피던스를 정밀하게 측정하는 장치. -Outputimpedance:50Ω(nominal) -ACsourcepower:-45to+10dBm 유사연구가 있을 시 필요하면 공동활용이 가능하다. |
장비이미지코드 | http://nfec.ntis.go.kr/storage/images/equip/photo/201306/.thumb/2013060710142616.JPG |
장비위치주소 | 대전광역시 유성구 도룡동 452 한국표준과학연구원 응용물리동(203) F1 |
NFEC 등록번호 | NFEC-2013-06-179770 |
예약방법 | |
카타로그 URL | |
메뉴얼 URL | |
원문 URL | http://www.zeus.go.kr/equip/read?equipId=Z-NTIS-0038003 |
첨부파일 |
과학기술표준분류 | |
---|---|
ICT 기술분류 | |
주제어 (키워드) |